Mostrar mensagens com a etiqueta Postais. Mostrar todas as mensagens
Mostrar mensagens com a etiqueta Postais. Mostrar todas as mensagens

quinta-feira, 10 de junho de 2010

Postais lindos com botões!

How to Make Button-Embellished Cards

comments (4) March 19th, 2009 ShareThis
kaytet kayte terry, contributor
Love it! 7 users recommend
A set of cute ribbon and button–embellished cards in  blues and yellows.
A selection of some ribbons and buttons I used. Pick a color story  that you really love.
Poke holes in the card to make a guide for sewing on the buttons.
A set of cute ribbon and button–embellished  cards in blues and yellows.

A set of cute ribbon and button–embellished cards in blues and yellows.

Photo: Kayte Terry
1 | 2 All

When is the last time you got a nice handwritten note from a friend? Can't remember? Well, it seems that the art of letter writing is almost lost to us. Sure, e-mails are easier, but a handwritten note is something really special. Let me tell you, the only thing better than a handwritten note is a handmade and handwritten note. When I was about 14, I had a really great pen pal. We were both artistically inclined and would turn our letters and envelopes into mini works of art. One envelope she sent was encrusted with sewn-on buttons. It was one of my favorites and I still have it to this very day. These cards are definitely inspired by her.

A couple of things to keep in mind when sewing on paper: Make sure to change out your sewing needle before you go back to sewing on fabric, and I think that leather needles sew better on paper.

And one more thing: If you are going to mail these cards, remember that the buttons make them a bit heavier and you might need more postage.

What you'll need to make two cards:

  • Cardstock in two contrasting colors
  • X-Acto knife, cutting mat, and ruler
  • Decorative-edge scissors and fabric scissors
  • Assorted buttons
  • Scraps of ribbon
  • Glue stick or spray adhesive
  • Sewing machine
  • Needle and thread
  • Envelopes

Here are your two blank cards.

1. Lay out a sheet of cardstock on the cutting mat. Fold the cardstock in half lengthwise, and press the folded edge flat with the side of a ruler. Using a ruler, cut the sheet in half to make two cards that are 4-1/4 inches x 5-1/2 inches.


I used pinking shears to make these decorative edges. You also could use a scallop or even just cut them straight with an X-Acto knife.

2. Mark two 3-3/4-inch x 5-inch rectangles on the other sheet of cardstock. Cut out with decorative-edge scissors or, if you prefer, with an X-Acto knife.


A selection of some ribbons and buttons I used. Pick a color story that you really love.

3. Lay out all your buttons and ribbons and figure out your design. You will be working on the 3-3/4-inch x 5-inch rectangles.


Sew on the ribbons with a straight or zigzag stitch. Backstitch at the beginning and end of each line.

4. Start with the ribbons: Lightly coat the back of the ribbons with adhesive and adhere to the cardstock as desired. Trim the ends with fabric scissors. Use your sewing machine to topstich over the ribbons. You can also add some more decorative lines with the machine if you wish.


Poke holes in the card to make a guide for sewing on the buttons.

5. Add the buttons: You will want to make guide holes in the card for the button. Hold the button on the card where you want it to go, and poke holes into the cardstock through the button holes with a needle. Thread a needle and knot at the end. Sew the button on using these holes as a guide and knot on the back of the cardstock.

6. When you are happy with your design, use a glue stick or spray adhesive to lightly coat the back of the cardstock and affix it to the front of the cards.

7. With the sewing machine, stitch around the edge of the contrasting cardstock rectangle to permanently affix to the card. If you have buttons close to the edge, either sew the cards using a zipper foot or just sew some of the sides of the card.

8. If you want, you can also add some ribbon and button embellishments to the flap of the envelope in the same way.

domingo, 30 de maio de 2010

Postal original

Be My Valentine: Stained-glass Hearts
  • empty star empty star empty star empty star empty star
  • Rate this craft
  • Rated by 71 members
Total Time Needed:
1 Hour

When the urge to wax romantic strikes, these melted-crayon valentines really fit the bill. Parents will need to do a little ironing here, but shaving the crayons is a job that kids can really put their hearts into.

Materials
  • Crayons (light and bright colors work best)
  • Handheld pencil sharpener
  • Waxed paper
  • Large paper grocery bags
  • Ironing board and iron
  • Scissors
  • Permanent marker
X
Instructions
  1. Be My Valentine: Stained-glass Hearts - Step  1 Peel the paper off the crayons. Use a pencil sharpener to shave them over a large sheet of waxed paper, spreading the shavings thinly and leaving a wide blank border around the edges of the paper.

  2. Be My Valentine: Stained-glass Hearts - Step  2 Place a flattened paper bag on your ironing board, then set the crayon-covered waxed paper on top of it. Cover the shavings with a second piece of waxed paper and then another flattened bag. Heat the iron on the medium or wool setting, then slowly and evenly press the surface of the top bag (a parent's job). Continue ironing until the crayon shavings are evenly melted (peek under the bag to check).

  3. Be My Valentine: Stained-glass Hearts - Step  3 Once the waxed paper is cool, your child can cut out a bunch of hearts. If he opts for larger hearts, he can use a permanent marker to print greetings directly on them. Smaller confetti-style hearts are great for filling store-bought cards.

Variations:
For an extra-special surprise, hang a stained-glass heart in this simple stand-up frame. To make one, cut two 4-inch squares out of colored card stock. Cut matching 2-inch-wide circles from the centers of the squares and discard them. Now cut 1-inch notches in each square as illustrated in the diagrams at right. Fit the squares together so that the notches interlock, as shown, and use thread and tape to hang a heart in the opening.
Daqui

domingo, 9 de maio de 2010

Uma ideia para o próximo ano...

Pop-Up Flower Card

www.enchantedlearning.com

pop-up flower supplies

Supplies

White construction paper
Colored construction paper
Construction paper scraps
Markers/crayons
Scissors
Glue/tape


Directions

1. Fold a piece of white and a piece of colored paper in half like a card.

popup

2. On the folded side of the white piece, put scissors about 2 inches down from top and cut down diagonally about 2 1/2- 3 inches.

popupflower

3. Fold the flap to each side to crease it, then open the card and pinch it towards the middle and crease it well. This will form the "vase."

popupflower3a

popupflower3b

popupflower3c

4. Make flowers by gluing leaves on a flower stem. Cut out flower shapes and glue stems in between.

popupflower4a

popupflower4b

5. Tape or glue flowers inside the back of the vase part of the card.

popupflower5a

popupflower5b

6. Close the card and glue colored construction paper over the outside. Be sure not to glue over the vase!

popupflower6

7. Decorate the front and write a message inside.

popupflower7